Removing The Safelight Receptacle J35 - Kodak X-Omat 270 RA Service Manual

Removing the Safelight Receptacle J35

[1] Deenergize the PROCESSOR. See page 1-5.
[2] Remove the 2 SCREWS and the SAFELIGHT
PANEL.
[3] Record the positions of the wires.
[4] Disconnect the 3 wires at the SAFELIGHT
RECEPTACLE.
[5] Press the TABS together to remove the
SAFELIGHT RECEPTACLE from the
SAFELIGHT PANEL.
[6] Reverse the above procedure to install a new
SAFELIGHT RECEPTACLE and to assemble
the PROCESSOR.
6-6
SAFELIGHT
PANEL
SAFELIGHT
RECEPTACLE
Replacement of the Safelight Receptacle
SCREW (2)
TAB
H104_0437CCA
H104_0437CA
2B6845