Kodak X-Omat 270 RA Service Manual page 2

The information contained herein is based on the experience and knowledge relating to the subject matter gained by
Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express
or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or
special damages, resulting from the use of this information, even if loss or damage is caused by Kodak's negligence or
other fault.
To avoid hazardous conditions, keep floors and floor coverings around your Kodak X-Omat 270
RA PROCESSOR and associated drains clean and dry at all times. Any accumulation of fluids
from mixing tanks, drain lines, etc, should be cleaned up immediately. In the event of an
accumulation of liquid due to backup, overflow, or other malfunctions of the drain associated with
your X-Omat PROCESSOR, call a plumber or other contractor to correct any problem with the
drain. Kodak accepts no responsibility or liability whatsoever for the serviceability of any drain
connected to or associated with a Kodak X-Omat PROCESSOR. Such drains are the sole
responsibility of the customer.
This equipment includes parts and assemblies sensitive to damage from electrostatic discharge.
Use caution to prevent damage during all service procedures.
2
PLEASE NOTE
2B6845