Test Processor Transition Modules; Installation - MTS Systems FlexTest IIm Manual

Installing 497/498 Electronics (FTIIm)
T M
RANSITION ODULE
498 Analog Out
498 Input Filter
498 RS-485 Transition Module
498 System Digital I/O
Transition Module
498 Digital I/O Transition
Module
493.80 Encoder Transition
493.81 Analog In BNC
493.82 Analog Out BNC
493.83 Filtered Analog Input
72

Installation

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Test Processor Transition Modules

F
UNCTION
This module includes eight BNC connectors that provide
analog outputs from the 498.65 ADDA module. These
outputs are associated with a D/A mezzanine card.
Four analog outputs are available with the standard ADDA
module. Additional outputs require a second ADDA
module (or an optional fourth mezzanine card).
This module includes eight BNC connectors that provide
filtered analog inputs to the 498.65 ADDA module. These
inputs are associated with an A/D mezzanine card.
Four-channel systems use a standard ADDA module which
provides four analog inputs. For 8-channel systems, a
second ADDA module (or an optional fourth mezzanine
card) is required to provide the other four inputs.
This module provides serial connections for use with
remote station controllers (RSCs) or Eurotherm
temperature controllers.
The System Digital I/O Transition module is double-width
module that provides connection to the system digital I/O
and the station interlocks on the 498.71B GRES III module.
This transition module provides 16 channels of user-
defined digital inputs and outputs. In order to use these
digital inputs and outputs, this module must be connected
to a 498 Digital I/O Access Panel.
Note On some custom FlexTest IIm Controllers, this module
must be connected to a 498 Remote Digital I/O
Access Panel.
Interfaces with up to four encoders.
Provides up to eight channels of analog input to each
Model 493.55 A/D module. The input signals must be
within ±10 V DC.
Provides eight channels of analog output from the Model
493.56 D/A modules. The output signals are within ±10 V
DC.
Provides up to eight channels of filtered analog input to
each Model 493.55 A/D module.
MTS 793 Controller Hardware