Installing 497/498 Electronics (Ftiim); Connecting The Console And Chassis Power; How To Connect The Chassis Power Cables - MTS Systems FlexTest IIm Manual

Installing 497/498 Electronics (FTIIm)

Contents

Connecting the Console and Chassis Power

How To Connect the Chassis Power Cables

MTS 793 Controller Hardware
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connecting the Console and Chassis Power
Grounding the Console and Chassis
Model 497 .01 Analog Chassis
About Analog Chassis Slots
Analog Chassis Plug-in Modules
Analog Chassis Transition Modules
Adding an Analog Chassis to Your Console
Model 497 .05 Hydraulic Control Panel
Test Processor Plug-in Modules
Test Processor Transition Modules
Each chassis installed in your console can be configured for 115 or 230
V AC service. To configure each chassis for 230 V AC service, refer to
the following product manuals.
• 497.05 Hydraulic Control Panel (100-036-577)
• 497.01 Analog Chassis (100-036-577)
• 498.22/498.23 Test Processor (100-036-578)—for FlexTest IIm
You can plug the hydraulic control panel and the test processor chassis
into the AC power strip inside the console.
The analog chassis requires an external power supply. Typically, it is
connected to the hydraulic control panel. If you have more than one
analog chassis, you must plug each additional analog chassis into a
remote power supply.
Installing 497/498 Electronics (FTIIm)
59
60
61
61
62
64
66
68
69
71
Installation 59