Documentation Conventions - MTS Systems FlexTest IIm Manual

Conventions
Conventions

Documentation Conventions

Hazard conventions
Notes
16
Preface
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following paragraphs describe some of the conventions that are
used in your MTS manuals.
As necessary, hazard notices may be embedded in this manual. These
notices contain safety information that is specific to the task to be
performed. Hazard notices immediately precede the step or procedure
that may lead to an associated hazard. Read all hazard notices carefully
and follow the directions that are given. Three different levels of
hazard notices may appear in your manuals. Following are examples
of all three levels.
Note For general safety information, see the safety information provided
with your system.
Danger notices indicate the presence of a hazard with a high level of
risk which, if ignored, will result in death, severe personal injury, or
substantial property damage.
Warning notices indicate the presence of a hazard with a medium level
of risk which, if ignored, can result in death, severe personal injury, or
substantial property damage.
Caution notices indicate the presence of a hazard with a low level of
risk which, if ignored, could cause moderate or minor personal injury,
equipment damage, or endanger test integrity.
Notes provide additional information about operating your system or
highlight easily overlooked items. For example:
Note Resources that are put back on the hardware lists show up at the
end of the list.