Status:measurement:instrument[:Event]; Status:measurement:instrument:enable - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Example
:STAT:MEAS:ENAB #b0010000000000000
Also see
Measurement Event Register

:STATus:MEASurement:INSTrument[:EVENt]?

This command reads and clears the Measurement Instrument Event Register of the status model.
Type
Query only
Usage
:STATus:MEASurement:INSTrument[:EVENt]?
Details
This attribute reads the Measurement Instrument Event Register of the status model and then clears
the register.
The instrument returns a decimal value that corresponds to the binary-weighted sum of all bits set in
the register. For details, see
Also see
None

:STATus:MEASurement:INSTrument:ENABle

This command sets or reads the contents of the Measurement Instrument Event Enable Register of the status
model.
Type
Command and query
Usage
:STATus:MEASurement:INSTrument:ENABle <n>
:STATus:MEASurement:INSTrument:ENABle?
[n]
Details
This command sets or reads the contents of the enable register of the Measurement Instrument
Event Register.
When one of these bits is set and the corresponding bit in the Measurement Instrument Event
Register is set, the ISUM bit in the Measurement Event Register is set.
077114601 / March 2019
(on page D-17)
Affected by
Not applicable
Measurement Instrument Event Register
Affected by
Power cycle
The status of the Measurement Instrument Enable Register.
Section 7: SCPI command reference
Sets the ISUM bit of the measurement
status enable register using a binary
value.
You could also send the decimal value
8192 or the hexadecimal value: #h2000.
Where saved
Not applicable
Where saved
Not applicable
Default value
Not applicable
(on page D-18).
Default value
0
7-149