Tektronix Keithley 2281 Series Reference Manual page 135

Section 2: General operation
Calibration reset values
Setting*
Not available from front panel
:CALibration:PROTected:STATe
7-99)
MENU > System > Settings > System
Password > Calibration
:CALibration:PROTected:CODE
7-92)
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or
battery simulation). If you do not see the option listed here on the menu, it may not be available for the function you
are using.
Digital I/O reset values
Setting*
MENU > Trigger > Digital In/Out
:DIGital:LINE<n>:FUNCtion
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or
battery simulation). If you do not see the option listed here on the menu, it may not be available for the function you
are using.
Display reset values
Setting*
MENU > System > Settings > Backlight
Brightness
:DISPlay:BRIGhtness
Not available from front panel
:DISPlay:SCREen
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or
battery simulation). If you do not see the option listed here on the menu, it may not be available for the function you
are using.
2-112
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
(on page
(on page
(on page 7-100)
(on page 7-102)
(on page 7-103)
Default value reset from
MENU > System >
Settings > Reset
Off
"KI002281S"
Default value reset from
MENU > System >
Settings > Reset
Line 1: Trigger In
Line 2: Meter Out
Line 3: Fault Out
Line 4: Manual In
Line 5: Manual In
Line 6: Manual In
Default value reset from
MENU > System > Settings
> Reset
50
Not applicable
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
OFF
Not applicable
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
1: AUTO
2: AUTO
3: AUTO
4: MINP
5: MINP
6: MINP
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
50
HOME
077114601 / March 2019