Battery[N]:Test[:Source]:Current:protection[:Level] - Tektronix Keithley 2281 Series Reference Manual

Section 7: SCPI command reference

:BATTery[n]:TEST[:SOURce]:CURRent:PROTection[:LEVel]

This command sets and queries the protection threshold value of the output current in the battery test function.
Type
Command and query
Usage
:BATTery[n]:TEST[:SOURce]:CURRent:PROTection[:LEVel] <value>
:BATTery[n]:TEST[:SOURce]:CURRent:PROTection[:LEVel]?
:BATTery[n]:TEST[:SOURce]:CURRent:PROTection[:LEVel]? DEFault
:BATTery[n]:TEST[:SOURce]:CURRent:PROTection[:LEVel]? MINimum
:BATTery[n]:TEST[:SOURce]:CURRent:PROTection[:LEVel]? MAXimum
[n]
<value>
Details
This command specifies the protection threshold value of the current to be sourced to the battery
under test.
Example
:BATT:TEST:CURR:PROT 2
Also see
None
7-60
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Affected by
Recall settings
Instrument reset
Power cycle
Channel number: For single-channel instruments, the value is 1
0.1 to 6.1 A
Where saved
Save settings
Set the protection threshold value to 2 A.
Default value
6.1 A
077114601 / March 2019