Tektronix Keithley 2281 Series Reference Manual page 141

Section 2: General operation
Battery test source reset values
Setting*
MENU > SOURCE > (Dis)charge > V-Set
:BATTery[n]:TEST[:SOURce]:VOLTage[:LEVel
] (on page 7-63)
MENU > SOURCE > (Dis)charge > Charge
limit
:BATTery[n]:TEST[:SOURce]:CURRent:CLIMit
(on page 7-59)
MENU > SOURCE > Protect > Overvoltage
Protection
:BATTery[n]:TEST[:SOURce]:VOLTage:PROT
ection[:LEVel]
MENU > SOURCE > Protect > Overcurrent
Protection
:BATTery[n]:TEST[:SOURce]:CURRent:PROT
ection[:LEVel]
MENU > SOURCE > Protect > Maximum
Voltage
:BATTery[n]:TEST[:SOURce]:VOLTage:LIMit
(on page 7-64)
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or battery
simulation). If you do not see the option listed here on the menu, it may not be available for the function you are using.
2-118
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
(on page 7-65)
(on page 7-60)
Default value reset from
MENU > System > Settings
> Reset
0 V
0.1 A
21 V
6.1 A
20 V
Default value reset by the
*RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
0.0
0.1
21.0
6.10
20.000
077114601 / March 2019