Sense[N]:Function - Tektronix Keithley 2281 Series Reference Manual

Section 7: SCPI command reference
SENSe subsystem
The SENSe subsystem commands configure and control the measurement functions of the 2281S.
Many of these commands are set for a specific function (concurrent, current, or voltage). For example,
you can program a range setting for each function. The settings are saved with that function.

:SENSe[n]:FUNCtion

This command selects which type of measurement is active: Concurrent, current, or voltage.
Type
Command and query
Usage
:SENSe[n]:FUNCtion <name>
:SENSe[n]:FUNCtion?
[n]
<name>
Details
Set this command to the type of measurement you want to make.
Reading this command returns the measure function that is presently active.
Examples
:SENS:FUNC "VOLT"
Also see
None
7-114
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Affected by
Recall settings
Instrument reset
Power cycle
Channel number: For single-channel instruments, the value is 1
A string that contains the measurement function to make active:

Concurrent: "CONCurrent[:DC]"

Current: "CURRent[:DC]"

Voltage: "VOLTage[:DC]"
For details, see Select a measurement function
Where saved
Save settings
(on page 2-96).
Make the voltage measurement function the active
function.
Default value
"CONC"
077114601 / March 2019