Tektronix Keithley 2281 Series Reference Manual page 136

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Format reset values
Setting*
Not available from front panel
:FORMat:ELEMents
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or
battery simulation). If you do not see the option listed here on the menu, it may not be available for the function you
are using.
Output reset values
Setting*
MENU > Source > Settings > Output
:OUTPut[:STATe]
MENU > Source > Settings > Output Delay
:OUTPut:DELay:STATe
MENU > Source > Settings > Slew Rise
:OUTPut:DELay:RISing
MENU > Source > Settings > Slew Fall
:OUTPut:DELay:FALLing
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or
battery simulation). If you do not see the option listed here on the menu, it may not be available for the function you
are using.
077114601 / March 2019
(on page 7-17)
(on page 7-113)
(on page 7-110)
(on page 7-109)
(on page 7-108)
Default value reset from
MENU > System > Settings
> Reset
Not applicable
Default value reset from
MENU > System > Settings
> Reset
Off
Off
100.0 V/s
100.0 V/s
Section 2: General operation
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
"READ, SOUR, UNIT,
REL"
Default value reset by
the *RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
0 (Off)
0 (Off)
0.0
0.0
2-113