Tektronix Keithley 2281 Series Reference Manual page 44

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Source List menu for the power supply function
This menu allows you to set up a source configuration list.
Setting
List
Save
Delete
Insert
Copy
Points
List table
Source Delay menu for the power supply function
This menu allows you to set a delay for the source. For details, refer to
Setting
Source Delay
State
077114601 / March 2019
Description
Select a list from nonvolatile memory; import a list from an external USB flash
drive; save a list to an external USB flash drive.
Save the present list to nonvolatile memory.
Delete the specified points from the list.
Insert one point with default settings before each specified point. The default
settings are: 0.000 V, 0.100 A, 0.100 s.
Copy the selected settings of the point and insert a new point with the same
settings before each point.
Shows the number of points in the list (read only).
This table shows all the setting values in the list. You can edit them by
moving focus and pressing the ENTER key.
Description
Configure the delay time using the numerical keys, navigation wheel, and
soft keys.
Enable or disable the delay that occurs when the source is turned on.
Section 2: General operation
Source delay (on page 3-10).
2-21