Clearing The Buffer; Automatically Clearing A Buffer - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual

Clearing the buffer

You can clear all readings and statistics from the buffer. The following topics provide information
about using the front panel or remote commands to clear a buffer.
To use the front panel to clear a reading buffer:
1. Press the MENU key.
2. Under Measure, select Data Buffers.
3. Select Clear Buffer to clear the buffer.
4. When the Are you sure you want to clear buffer prompt is displayed, press Yes to confirm.
To clear the buffer, send the following command:
:TRACe:CLEar

Automatically clearing a buffer

When using the power supply function, you can enable the autoclear function for the buffer. With
autoclear enabled, the buffer is automatically cleared when the storage process starts.
Buffer autoclear is only available when using the power supply function.
Using the front panel:
1. Press the MENU key.
2. Under Measure, select Data Buffers.
3. Select the button next to Auto Clear. The selection window is displayed.
4. Select On to enable the autoclear function.
Using the SCPI commands:
:TRACe:CLEar:AUTO ON
:TRACe:CLEar:AUTO OFF
077114601 / March 2019
Section 3: Functions and features
3-21