Trace[N]:Feed - Tektronix Keithley 2281 Series Reference Manual

Section 7: SCPI command reference

:TRACe[n]:FEED

This command selects the source of readings.
Type
Command and query
Usage
:TRACe[n]:FEED <name>
:TRACe[n]:FEED?
[n]
<name>
Details
When you select SENSe for the source, the readings stored in the trace buffer do not have a math
calculation even if the math state is ON. For details about data flow, refer to
(on page 4-15).
Example
:TRACe:FEED SENS
:TRACe:FEED?
Also see
None
7-190
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Affected by
Recall settings
Instrument reset
Power cycle
Channel number: For single-channel instruments, the value is 1
Select the source of readings:


Where saved
Save settings
Store the readings before the math calculation: SENSe
Store the readings after the math calculation: CALCulate
Set the source of readings to SENSe and query the
source.
Output is:
SENS
Default value
SENS
Displayed measurements
077114601 / March 2019