Reset The Instrument; Reset Default Values - Tektronix Keithley 2281 Series Reference Manual

Section 2: General operation
The instrument also responds to other types of resets. These resets include:
Password reset: This resets the instrument password to its default value. You can reset the
password by pressing the MENU key and under System, selecting Settings > System Password.
The default password is admin. For more information, see
LAN reset: This resets the LAN settings and the instrument password to the system default
values. You can reset the password by pressing the MENU key, selecting Communication (under
System), selecting LXI LCI, and pressing the ENTER key.
Status preset: This resets all bits in the status model. If you are using the SCPI command set,
refer to :STATus:PRESet

Reset the instrument

You can reset many of the instrument settings to their default values. For details about what gets
reset, see

Reset default values

command descriptions.
To reset the instrument using the front panel:
1. Press the MENU key.
2. Under system, select Manage.
3. Select System Reset.
4. The commands are reset and a confirmation message is displayed.
To reset the instrument using SCPI commands:
Send the command:
:SYSTem:PRESet
Reset default values
When you turn instrument power on and off or send a reset command, many of the settings in the
instrument are reset to their default values.
The settings that are affected are listed in the following tables. The tables show SCPI and front-panel
values for each setting. They are grouped by function and sorted alphabetically in each group by the
name of the SCPI command.
2-110
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
(on page 7-156).
(on page 2-110). Default values are also listed in the individual
Instrument access (on page 3-1).
077114601 / March 2019