Tektronix Keithley 2281 Series Reference Manual page 104

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual Section 2: General operation
Figure 53: Modify IP configuration
4. Change the values.
5. Select Submit. The instrument reconfigures its settings, which may take a few seconds.
You may lose your connection with the web interface after selecting Submit. This is normal and
does not indicate an error or failure of the operation. If this occurs, find the correct IP address and
reopen the web page of the instrument to continue.
Change the web interface password
You can change the instrument password from the web interface.
To change the password:
1. From the web interface home page, select Set Password.
2. In the Current password box, enter the presently used password.
3. In the New password and Confirm new password boxes, enter the new password.
4. Select Submit.
The default password is admin.
077114601 / March 2019 2-81