Calibration Subsystem; Calibration:protected:cancel - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual

CALibration subsystem

The commands in this subsystem configure and control the calibration operations.

:CALibration:PROTected:CANCel

This command cancels the calibration procedures and drops the new constants.
Type
Command only
Usage
:CALibration:PROTected:CANCel
Details
When this command is sent, the instrument cancels the calibration and loses the new calibration
constants.
Example
:CAL:PROT:CANC
Also see
None
077114601 / March 2019
Affected by
Not applicable
Section 7: SCPI command reference
Where saved
Not applicable
Cancels the calibration procedure and reverts the
constants.
Default value
Not applicable
7-91