Status:operation:instrument:enable; Status:operation:instrument:isummary[:Event] - Tektronix Keithley 2281 Series Reference Manual

Section 7: SCPI command reference

:STATus:OPERation:INSTrument:ENABle

This command sets or reads the contents of the Operation Instrument Enable Register of the status model.
Type
Command and query
Usage
:STATus:OPERation:INSTrument:ENABle <n>
:STATus:OPERation:INSTrument:ENABle?
[n]
Details
This command sets or reads the contents of the Enable register of the Operation Instrument Event
Register.
When one of these bits is set and the corresponding bit in the Operation Instrument Event Register is
set, the ISUM bit in the Operation Event Register is set.
When sending binary values, preface <n> with #b. When sending hexadecimal values, preface <n>
with #h. No preface is needed when sending decimal values.
Example
:STAT:OPER:INST:ENAB #b0000000000000010
Also see
None

:STATus:OPERation:INSTrument:ISUMmary[:EVENt]?

This command reads the Operation Instrument Summary Event Register of the status model.
Type
Query only
Usage
:STATus:OPERation:INSTrument:ISUMmary[:EVENt]?
Details
This attribute reads the Operation Instrument Summary Event Register of the status model and clears
the register.
The instrument returns a decimal value that corresponds to the binary-weighted sum of all bits set in
the register.
7-154
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Affected by
Power cycle
The status of the Operation Instrument Enable Register
Affected by
Not applicable
Where saved
Not applicable
Sets bit 1 of the Operation Instrument
Enable Register using a binary value.
You could also send the decimal value 2
or the hexadecimal value #h2.
Where saved
Not applicable
Default value
0
Default value
Not applicable
077114601 / March 2019