System:preset - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual

:SYSTem:PRESet

This command returns the instrument to the factory default conditions and erases all user data stored in
nonvolatile memory.
Type
Command only
Usage
:SYSTem:PRESet
Details
Sending this command will return the instrument to the factory default conditions and erases all user
data stored in nonvolatile memory, such as list parameter and setup information.
This command does not influence the status structure registers and error queue.
This command resets GPIB address and IP address to default settings. After sending this command,
make sure to use the new address to communicate with the instrument.
You should allow ample time for the command to be processed before attempting to communicate
with the instrument again.
Example
:SYST:PRES
Also see
*RST (on page 7-7)
Reset default values
077114601 / March 2019
Affected by
Not applicable
(on page 2-110)
Section 7: SCPI command reference
Where saved
Not applicable
Set the instrument to restore the factory default settings
and erase all user data stored in nonvolatile memory,
such as list parameter and setup information.
Default value
Not applicable
7-175