Tektronix Keithley 2281 Series Reference Manual page 134

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Math and statistics reset values
Setting*
MENU > Measure > Math > Type
:CALCulate[1]:<function>:FORMat
7-77)
MENU > Measure > Math > b (Offset)
:CALCulate[1]:<function>:KMATh:MBFactor
(on page 7-78)
MENU > Measure > Math > m (Gain)
:CALCulate[1]:<function>:KMATh:MMFactor
(on page 7-79)
MENU > Measure > Math > Units
:CALCulate[1]:<function>:KMATh:MUNits
(on page 7-80)
MENU > Measure > Math > State
:CALCulate[1]:<function>:STATe
7-81)
MENU > Measure > Data Buffers >
Statistics Format
:CALCulate2:FORMat:ELEMents
7-86)
MENU > Measure > Data Buffers >
Statistics Function
:CALCulate2:FUNCtion
MENU > Measure > Data Buffers >
Statistics
:CALCulate2:FORMat
MENU > Measure > Data Buffers > Size
:TRACe[n]:POINts or :DATA[n]:POINts
page 7-192)
MENU > Measure > Data Buffers >
Autoclear
:TRACe[n]:CLEar:AUTO or
:DATA[n]:CLEar:AUTO
MENU > Measure > Data Buffers > Mode
:TRACe[n]:FEED:CONTrol or
:DATA[n]:FEED:CONTrol
MENU > Views > Sheet > Statistics
:CALCulate2:STATe
* Some of the options listed in this table are only available for specific functions (power supply, battery test, or
battery simulation). If you do not see the option listed here on the menu, it may not be available for the function you
are using.
077114601 / March 2019
Default value reset from
MENU > System >
Settings > Reset
mx+b
(on page
+0.000e+0
+1.000e+0
X
Off
(on page
All
(on page
Current
(on page 7-87)
Minimum On
Maximum On
Peak-Peak On
(on page 7-84)
Mean On
Std Dev On
100
(on
On
(on page 7-186)
Always
(on page 7-191)
Off
(on page 7-90)
Section 2: General operation
Default value reset by the
*RST (on page 7-7)
command or
:SYSTem:PRESet (on
page 7-175) command
MXB
0.0
+1.000000e+00
"X"
0 (Off)
"READ, UNIT"
CURR
MIN, MAX, MEAN, SDEV,
PKPK
100
1 (On)
ALW (Always)
0 (Off)
2-111