Mmemory:save:setup - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Example
:MMEMory:LOAD:SETup "mysetup"
Also see

:MMEMory:SAVE:SETup

*RCL (on page 7-6)
*SAV (on page 7-7)
:MMEMory:SAVE:SETup
This command exports the present setup to the external USB flash drive.
Type
Command only
Usage
:MMEMory:SAVE:SETup <fileName>
<fileName>
Detail
This command allows you to save the present instrument setup to the external USB flash drive.
Make sure that the external USB flash drive is connected to the instrument before you send this
command. An unstable connection between the USB flash drive and the instrument will cause an
error 520, "No USB flash drive found."
Example
:MMEMory:SAVE:SETup "mysetup"
Also see
:MMEMory:LOAD:SETup
*RCL (on page 7-6)
*SAV (on page 7-7)
077114601 / March 2019
(on page 7-107)
Affected by
Not applicable
A string that contains a name for the saved setup (maximum 8 characters)
(on page 7-106)
Section 7: SCPI command reference
Recall the setup named mysetup in the external
USB flash drive to the instrument.
Where saved
Not applicable
Save the present setup to the external USB flash
drive as mysetup.
Default value
Not applicable
7-107