Calculate2:Format:elements - Tektronix Keithley 2281 Series Reference Manual

Section 7: SCPI command reference

:CALCulate2:FORMat:ELEMents

This command specifies or queries data elements to be included in the data string. It only influences minimum
and maximum query results.
Type
Command and query
Usage
:CALCulate2:FORMat:ELEMents <itemList>
:CALCulate2:FORMat:ELEMents <itemList>,<channel>
:CALCulate2:FORMat:ELEMents?
:CALCulate2:FORMat:ELEMents? <channel>
<itemList>
<channel>
Details
This command affects the output of the following commands:

:CALCulate2:IMMediate?

:CALCulate2:DATA?
You can specify one or more elements. <itemList> is a string that must be enclosed in single or
double quotes. Each element in the list must be separated by a comma (,).
7-86
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Affected by
Recall settings
Instrument reset
Power cycle
The available data elements:

Voltage and current reading: READing

Reading units: UNIT

Reading number: RNUMber

Timestamp: TSTamp. For example, output might be: 07/01/2013
19:21:36.2553
The channel number (default value is CH1):

Channel 1: CH1
Channel 2: CH2
Where saved
Save settings
Default value
READ, UNIT
077114601 / March 2019