Ese - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual

*ESE

This command sets and queries bits in the Standard Event Status Enable Register.
Type
Command and query
Usage
*ESE <n>
*ESE?
n
Details
When a bit in the Standard Event Status Enable Register is set and the corresponding bit in the
Standard Event Status Register is set on, the ESB bit of the Status Byte Register is set.
To set a bit, send the constant or the value of the bit as the <n> parameter. When 0 (zero) is
returned, no bits are set. You can also send 0 to clear all bits.
To query the Standard Event Status Enable Register (ESER), send *ESE?. The instrument returns a
decimal value that corresponds to the binary-weighted sum of all bits set in the register.
Example
*ESE 145
Also see
*CLS (on page 7-2)
Standard Event Register
Status model
077114601 / March 2019
Affected by
Power cycle
The value of the Standard Event Status Enable Register (0 to 255)
(on page D-9)
(on page D-1)
Section 7: SCPI command reference
Where saved
Not saved
*ESE 145 sets the Status Enable Standard Event
Register to binary 10010001, which enables the PON,
EXE, and OPC bits.
Default value
See Details
7-3