Battery[N]:Model:load:usb - Tektronix Keithley 2281 Series Reference Manual

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual

:BATTery[n]:MODel:LOAD:USB

This command imports a model from a USB flash drive to the internal memory.
Type
Command only
Usage
:BATTery[n]:MODel:LOAD:USB <modelindex>,<fileName>
[n]
<modelindex>
<fileName>
Details
This command imports a model from a USB flash drive to the instrument and saves it in the internal
memory with a name specified by <model-index>. If a model with that name already exists, the new
model will replace the existing model.
Make sure that the external USB flash drive is connected to the instrument properly before you send
this command. An unstable connection between the USB flash drive and the instrument causes error
520, "No USB flash drive found."
Example
:BATT:MOD:LOAD:USB 1,"myModel"
Also see
None
077114601 / March 2019
Affected by
Not applicable
Channel number: For single-channel instruments, the value is 1
1 to 9
The name of the battery model in the USB flash drive
Section 7: SCPI command reference
Where saved
Not applicable
Import the battery model with the name myModel from
the USB flash drive as model 1 in the internal memory.
Default value
Not applicable
7-29