Dräger Perseus A500 Instructions For Use Manual page 75

3 Remove the sealing plug from the inlet
nozzle (C) of the AGS.
4 Use the transfer hose to connect the non-
rebreathing system with the inlet nozzle on the
AGS (C).
CAUTION
Risk due to open AGS inlet nozzle
After using a non-rebreathing system, reinsert
the sealing plug into the inlet nozzle to prevent
contamination of the ambient air with anesthetic
gases.
Instructions for use Perseus A500 SW 2.0n
C
Assembly and preparation
75