Setting The Sound Volume; Adjusting The Alarms; Setting Alarm Tone Volume And Breathing Sound Volume; Setting The Alarm Limits - Dräger Perseus A500 Instructions For Use Manual

Operation

Setting the sound volume

Setting alarm tone volume and
breathing sound volume
WARNING
Risk of operation error
The acoustic alarm signals might not be
heard if functions such as "Breathing sound"
are used or when operating in a noisy
environment.
Always set the alarm tone to be sufficiently
loud.
1 Open the System setup dialog window.
2 Touch the System > Sound volume tab (A).

Adjusting the alarms

Setting the alarm limits

For a current case, the alarm limits can be set in
two ways:
– Setting via the Quick setup window
– Setting via the Alarms dialog window
Setting via the Quick setup window
1 Touch the respective waveform or parameter
field. The Quick setup window opens.
110
System setup
B
C
Alarm tone volume
 Set the desired value for Alarm tone volume
(B).
Breathing sound volume (optional)
 Set the desired value for Breathing sound
volume (C).
Quick setup
2 Set the upper alarm limit (A).
3 Set the lower alarm limit (B).
Instructions for use Perseus A500 SW 2.0n
A
A
A
B