Opening The Alarm History; Adjusting The Alarm Limits - Dräger Perseus A500 Instructions For Use Manual

Alarms

Opening the alarm history

The alarm history records all alarm messages for
the current case in chronological sequence.
1 Open the Alarms dialog window.
2 Touch the Alarm history tab (A).
Alarms
A
Use the rotary knob or the arrow buttons to scroll
the cursor up (B) or down (C).
The alarm history is deleted when Perseus is shut
down or a new case is started.

Adjusting the alarm limits

If an alarm is triggered because a lower limit or an
upper limit is transgressed, it might be necessary
to adjust the alarm limits. To do so, either set the
alarm limits, see page 110, or change the alarm
limits via the Quick setup window.
142
1 Touch the parameter field (A).
The Quick setup window opens, and the alarm
limit (B) that was violated is already selected.
Quick setup
B
2 Adjust the value (B) and confirm.
C
Perseus can be configured so that the Quick
setup window opens automatically in the event of
an alarm, see page 155.
A
Instructions for use Perseus A500 SW 2.0n
B