Device Outputs - Dräger Perseus A500 Instructions For Use Manual

Technical data
Operating characteristics (continued)
RFID system
Operating frequency
Transmitter power
Modulation
Electromagnetic compatibility
Protection classes
Device
Applied parts (connections for breathing
hoses)
Penetration of liquids
Classification in compliance with Directive
93/42/EEC, Annex IX
UMDNS Code Universal Medical Device
Nomenclature System – nomenclature system
for medical devices
Use of latex

Device outputs

Serial interfaces
Protocol
Alarm delay time (measured from time of
query)
Connector
Baud rate
Data bits
Parity
Stop bits
244
13.56 MHz ± 50 ppm (broadband)
≤42 dBμA/m (200 mW ± 1 dB)
ASK (Amplitude-Shift Keying)
Tested in compliance with IEC 60601-1-2
I, in compliance with IEC 60601-1
TYPE BF
IP20 according to IEC 60529,
meets IEC 60601-2-13
II b
10-134
Perseus is not made with natural rubber latex.
COM 1 and COM 2
Only connect devices that meet the require-
ments of IEC 60950-1/IEC 62368-1 for
ungrounded SELV circuits and the requirements
of IEC 60601-1 (as of the 2nd edition) for touch-
able secondary circuits with a maximum nomi-
nal voltage of 24 V DC.
MEDIBUS.X
Typically <2 s
9-way Sub-D
1200, 2400, 4800, 9600, 19200, 38400 baud
8
Even
1
Instructions for use Perseus A500 SW 2.0n