Password; Configuration Password For Perseus A500 Software 2.0N - Dräger Perseus A500 Instructions For Use Manual

Password

Configuration password for Perseus A500 Software 2.0n

Cut-out from the instructions for use Perseus
A500 Software 2.0n
Information for the configuration
password
To prevent unauthorized alteration, the start
settings for Perseus A500 are protected by a
password with 0 to 8 digits. Information on the start
settings, see page 150.
The configuration password appears on this page
of the instructions for use. Cut out the area with the
password and keep in a place which is safe from
access by unauthorized persons.
The configuration password can only be reset by
specialized service personnel.
Instructions for use Perseus A500 SW 2.0n
To prevent unauthorized alteration, the start
settings for Perseus A500 are protected by the
following configuration password:
Password
0000
285