Dräger Perseus A500 Instructions For Use Manual page 246

Technical data
Device outputs (continued)
Mains power sockets
Power sockets (version without isolation
transformer)
Power socket type
Power sockets with protective ground
Power sockets without protective ground
Fuse type
Power sockets
(version with isolation transformer)
Power socket type
Fuse type
Power sockets with protective ground
Total current
246
Observe the maximum current for each power
socket, the total current for all power sockets,
and the total permissible leakage current.
Mains power sockets have no battery back-up
and are independent of the switch-on state of
the device.
IEC
2 (maximum 3.15 A per power socket)
2 (maximum 1 A per power socket)
Fuses, T3,15AH 50V IEC 60127-2/V and
2
T1AH 50V IEC 60127-2/V, size 5 mm * 20 mm
2
Country-specific
Electronic automatic circuit breakers: 4 x 3 A,
slow-blow, for voltages up to 250 V and break-
ing capacity 2000 A.
And 1 x 8 A, slow-blow, for voltages up to 250 V
and breaking capacity 2000 A, in each case
conforming to IEC 60934
4 (maximum 3 A per power socket)
Max. 8 A
Main switch for isolation transformer and all
power sockets
Instructions for use Perseus A500 SW 2.0n