Operation
Creating additional logbook entries
The following events can create logbook entries
with measured values for the parameters etCO
,
2
MV, Pmean, PIP, Pplat, PEEP, FiO
, exp.
2
concentration of the primary anesthetic gas, and
etN
O:
2
– Adjustable time intervals
– Alarms with high or medium priorities
1 Open the System setup dialog window.
2 Touch the System > Logbook tab (A).
System setup
A
A
B
3 Touch the corresponding button (B).
Resetting user-specific settings
Changes made in the System setup dialog
window during operation can be reset to the start
settings.
1 Open the System setup dialog window.
2 Open the corresponding dialog window.
3 Touch the System defaults button and
confirm.
Instructions for use Perseus A500 SW 2.0n
115