Safety Information - Dräger Perseus A500 Instructions For Use Manual

Anesthesia workstation
Hide thumbs Also See for Perseus A500:
Table of Contents

Advertisement

Safety information

WARNING
Risk due to inappropriately reprocessed
products
The product may be contaminated with
infectious agents.
Before maintenance and before returning the
product for repair, reprocess the product.
Carry out the reprocessing as described in
the reprocessing instructions supplied with
the product.
WARNING
Risk if service is not performed regularly
Wear and material fatigue of the components
may lead to device failure and malfunctions.
Perform service at the specified intervals.
WARNING
Risk if service is not performed properly
Personal injury and property damage may
occur if service is not performed properly.
Service must be performed by those user
groups that are assigned to the particular
measure.
Instructions for use Perseus A500 SW 2.0n
WARNING
Risk if maintenance is not performed properly
If the device is connected to the power supply
or the gas supply during maintenance, there
is a risk of personal injury and property
damage.
Before performing maintenance, disconnect
all electrical connections from the power
supply and all gas connections from the gas
supply.
WARNING
Risk when the housing is being opened
Under the housing, there are live electrical
components, which may cause an electric
shock.
The housing may only be opened by those
user groups that are assigned to that
particular measure.
WARNING
Risk of patient injury
If maintenance activities are carried out
during ventilation, the patient will be put at
risk.
Only carry out maintenance activities when
there is no patient connected to the device.
Service
215

Advertisement

Table of Contents
loading

Table of Contents