Dräger Perseus A500 Instructions For Use Manual page 242

Technical data
Operating characteristics (continued)
Input connections
Noise emissions from device
Average sound pressure level Leq(A) during
ventilation with typical settings
Sound pressure level L(A) of the alarm tones
at the workstation, measured according to
IEC 60601-1-8 Edition 2.1:
Alarm tone sequence
Alarm tone volumes (all priorities)
Secondary acoustic alarm signal
Mains power supply failure alarm
Dimensions of trolley version (can deviate with
accessory equipment)
Width
Height
Depth
Dimensions of ceiling-mounted version without
flexibility trolley (can deviate with accessory
equipment)
Width
Height
Depth
Dimensions of ceiling-mounted version with
flexibility trolley (can deviate with accessory
equipment)
Width
Height
Depth
Work surface dimensions
Width
242
Complying with either
EN 850, ISO 407
DIN 477 T1
NF E 29-650
BS 341; Part 1
NBN 226
ISO 5145
Free field measurements complying with
ISO 3744
≤42 dB(A)
Settable from >50 dB(A) to <75 dB(A)
≥55 dB(A) and ≤75 dB(A)
≥55 dB(A) and ≤75 dB(A)
1150 mm (45.23 in)
1480 mm (58.27 in)
790 mm (31.1 in)
1150 mm (45.23 in)
1045 mm (41.14 in)
790 mm (31.1 in)
1150 mm (45.23 in)
1480 mm (58.27 in)
790 mm (31.1 in)
approx. 850 mm (33.46 in)
Instructions for use Perseus A500 SW 2.0n