Projector Installation - Christie CP2000-ZX User Manual

Section 2: Installation & Setup
2.1

Projector Installation

The following set of instructions explains how to install, connect and optimize the projector for smooth
operation.
be installed in a restricted access location.
when it has been leveled.
Before you begin installation, it is important to fully understand all site requirements and characteristics, and
that you have the following tools and components on hand. NOTE: In general, fasteners are metric sizes and
require metric tools. However, to complete lamp installation, imperial tools are required, which have been
provided inside the lamp door of the projector.

12" screwdrivers: Phillips #2 (magnetic) and flat

19 mm and 7/8" wrenches

Assorted Allen keys (metric)
 Single-phase 30A connection of AC supply to the terminal block
 Installation site must have an easily accessible 30-32A breaker nearby
 Heat extractor (Refer to
 Protective clothing / safety gear (required when handling the lamp)
 Lens cleaning tissue and solution
STEP 1 - Carrying/Moving the Projector
head a short distance.
Avoid tilting the projector on the right side. This can introduce an air bubble within the cool-
ant hoses that can lead to an air lock.
STEP 2 - (Optional) Install Projector on Rack Stand
from tipping. Secure the strap between the projector and the optional rack-mount or any
other surface it is mounted to.
An optional rack stand (P/N 108-272101-01 or P/N 108-282101-01) and hold down clamp (P/N 116-100101-
01) are available for use with the projector. If you intend to use this in your installation, refer to the instructions
provided with the rack stand before proceeding with STEP 3.
2-2
QUALIFIED TECHNICIAN REQUIRED for all installations. This product must
Auto LampLOC™ must be run any time the projector is physically moved or
STEP 5 - Connect Exhaust Ducting, on page 2-5
Four or more people are required to safely lift and hand-carry one projection
Keep the projector as level as possible when lifting or carrying the projector.
Use of the projector's safety strap is MANDATORY to prevent the projector
for requirements)
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)