Christie CP2000-ZX User Manual page 144

Appendix A: Serial API
Channel Name (NAM)
DESCRIPTION - Set the descriptive channel name for the specified channel
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select channel name for the current channel
EXAMPLES:
(NAM+C108 "Scope 2.39") Set channel name for channel 108
(NAM+C108?) Get channel name for channel 108
Network Setup (NET)
DESCRIPTION - Set the network parameters for Eth0, Eth1, Gateway, Subnet 0 and Subnet 1.
SUBCODE DESCRIPTION OF USE
DLP0
IP Address for the Cinema Electronics
ETH0 Set the IP address for the MGMT ethernet controller
ETH1 Set the IP address for the AUX ethernet controller
GATE IP Gateway for the MGMT, AUX and Cinema Electronics
MAC0 Gets the MAC address of the MGMT ethernet controller
MAC1 Gets the MAC address of the AUX ethernet controller
SUB0 Set the network subnet mask for the MGMT ethernet controller & Cinema Electronics
SUB1 Set the network subnet mask for the AUX ethernet controller
EXAMPLES:
(NET+ETH0 "192.168.1.35") - Set new IP address on the MGMT ethernet controller
(NET+ETH1 "192.168.1.36") - Set new IP address on the AUX ethernet controller
(NET+GATE "192.168.0.1") - Set the gateway
(NET+SUB0 "255.255.255.0") - Set the subnet mask on the MGMT ethernet controller
(NET+HOST "MyHostName") - Set the host name
(NET+DOMA "MyDomainName") - Set the domain name
(NET+ETH0 ?) - Retrieve IP address from MGMT controller. (NET+ETH0! 192.168.1.35)
(NET+ETH1 ?) - Retrieve IP address from AUX controller. (NET+ETH1! 192.168.0.100)
(NET+MAC0 ?) - Retrieve MAC address from MGMT controller. (NET+MAC0! 00:12:3F:7B:76:B4)
(NET+MAC1 ?) - Retrieve MAC address from AUX controller. (NET+MAC1! 00:12:3F:7B:76:B5)
(NET+GATE ?) - Retrieve default gateway. (NET+GATE! 192.168.0.1)
(NET+DLP0 "192.168.206.10") - Set Cinema IP address.
(NET+DLP0? ) (NET+DLP0! "192.168.206.010") Query Cinema IP address and response
Network Routing (NTR)
DESCRIPTION - Set routing for ASCII messages
SUBCODE DESCRIPTION OF USE
NONE Used to enable or disable daisy chaining
EXAMPLES:
(NTR ?1) List routing options.
(NTR 0) Each connection is routed separately.
(NTR 3) Full daisy-chaining
A-16 CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)