Status Menu; Status: System Menu - Christie CP2000-ZX User Manual

3.4.4 Status Menu

The menu provides an overall view of the projector's status.

Status: System Menu

The Status: System menu (Figure 3-10) provides status information on various projector components. Small
indicators are green during normal operation, but can change color to indicate a warning or critical error status.
A yellow indicator signifies an unusual environmental condition, such as the lamp has reached a set limit of
hours in use, as indicated by the user. It can also indicate a temperature has reached a higher than normal but
not critical level.
A red indicator can signify that 1) the environment has a serious problem or 2) a specific electrical component
is not detected or does not appear to be functioning properly. These errors require immediate attention.
Two rows of moni-
tored system compo-
nents. Status
indicator for each in
top left corner
(Green = OK, Red =
Alarm condition
exists).
Table 3.5 Summary of Status: System Components
Alarms
EDID checksum test
Lamp needs rotation
Lamp expired status
Configuration
Projector model
Projector serial number
Date of manufacture
Projector subtype
Projector subtype ID
Light engine native resolution
Ballast ID
Mgmt ID Address
DLP IP Address
Subnet Mask
Gateway
Aux IP Address
Aux Subnet Mask
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Figure 3-10 Status: System Menu
Displays number of hours logged on current lamp
Displays number of hours logged on current lamp
Displays projector model
Displays projector serial number
Displays manufacture date
2048 x 1080
Section 3: Operation
3-17