Christie CP2000-ZX User Manual page 153

Display Reference GPI (TDI)
DESCRIPTION - Setup Display Reference GPI for 3D control. This signal selects the input signal that will be used as a refer-
ence to synchronize multiple projectors so that the gating technology so that the images can be targeted to the correct eyes.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
None Select display GPI for the current channel
EXAMPLES:
(TDI?L) List all entries on Display Reference GPI control
(TDI+C101 1) Set Display Reference GPI to 1 on channel 101
(TDI+C101?) Get Display Reference GPI on channel 101
3D Dark Time (TDK)
DESCRIPTION - Setup Dark Time for 3D control. This controls how much time between displayed images the output remains
dark to allow for the glasses on other gating mechanism to flip between the eyes.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
None Select dark time for the current channel
EXAMPLES:
(TDK+C101 1) Set Dark Time to 1 on channel 101
(TDK+C101?) Get Dark Time on channel 101
Output Reference Delay (TDP)
DESCRIPTION - Setup Output Reference Delay phase for 3D control. Additional control for output timing relative to input
timing. The data range is -180 to 180.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
None Select output reference delay phase for the current channel
EXAMPLES:
(TDP+C101 1) Set Output Reference Delay phase to 1 on channel 101
(TDP+C101?) Get Output Reference Delay phase on channel 101
3D Display Reference (TDR)
DESCRIPTION - Setup display reference timing signal for 3D control.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select display reference for the current channel
EXAMPLES:
(TDR?L) List all entries on display reference control
(TDR+C101 1) Set display reference to 1 on channel 101
(TDR+C101?) Get display reference on channel 101
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Appendix A: Serial API
A-25