Christie CP2000-ZX User Manual page 133

Defaults (DEF)
DESCRIPTION - This control will reset all preference and configuration settings in the device to their default values. The
value of 111 must be sent with each of the sub codes as well as the default. The number 111 helps prevent accidental use of this
control.
SUBCODE DESCRIPTION OF USE
CHAN Restore default channels. 0 defaults all
CONF Set configuration controls to default
PREF Set preference controls to default
UNSV Set unsaved controls to default
USER Clears all users and restores the factory default user. Most UI's will require you to log in again after issu-
ing this command.
EXAMPLES:
(DEF 111) - Restore all preference, configuration, option, and unsaved controls to default
(DEF+USER 111) - Clear all users and restore factory default user
(DEF+CONF 111) - Reset all configuration controls
(DEF+PREF 111) - Reset all preference controls
(DEF+UNSV 111) - Reset all unsaved controls
(DEF+CHAN 101) - Restore Channel 101
(DEF+CHAN 0) - Restore all channels
(DEF+CHAN?) - Shows last channel defaulted or -1 on failure
Data Logging (DLG)
DESCRIPTION - Set data logging level.
SUBCODE DESCRIPTION OF USE
None There are 3 levels for data logging.
EXAMPLES:
Levels are:
0 = Minimum logging of activities. Logging system errors and power ON/ OFF, lamp ON/OFF, user login/logout only.
1 = Standard logging (errors plus select operations - shutter ON/OFF, changing channels)
2 = Maximum logging. All activities are logged.
(DLG1) Set current logging level to 1
(DLG?) Get current logging level. Response is (DLG!001)
Data Format (DTF)
DESCRIPTION - Select data packing format for selected input. Available data formats depends on current input port (as
selected by SIN).
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select data format for current channel
EXAMPLES:
DTF?) Get current data format
(DTF?L) Show entries on the list
(DTF 1) or (DTF "422 Packed 12Bit") Set current data format to 1 (292: 422 Packed 12Bit)
(DTF+C108?) Get data format on channel 108
(DTF+C108 20) or (DTF+C108 "Unpacked 8Bit") Use data format 20 (DVI: Unpacked 8Bit) on channel 1
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Appendix A: Serial API
A-5