Admin: Screen Menu - Christie CP2000-ZX User Manual

Section 3: Operation

Admin: Screen Menu

The Admin: Screen menu defines the portion of the projector's display panel you wish to use and any
cropping that is needed to disguise possible keystoning or other geometric aberrations. Once saved, a screen
file can be used with any incoming source as desired. Screen data is not included in a PCF and is independent
of source settings. Consider screen files as convenient compensations for physical limitations in the
environment. You will typically need one or two screen files per site.
Select screen from drop-
down list.
Select a reference point
that will be used to define
the screen display area.
Table 3.19 Summary of Admin: Screen Menu Options
ADMIN: SCREEN MENU OPTIONS
Presentation
Cropping
Letter Box
Lens Factor
Screen
Save
Restore
3-40
Crop corners and sides.
Figure 3-33 Admin: Screen Menu Options
Presentation points define what region of the projector's available display area responds to incoming data,
i.e. the display size and location. By default, the projector uses its complete display area (a full 2048 x 1080
panel). See Presentation Notes below.
Cropping hides unwanted data, useful if the image appears keystoned, etc. See Cropping Notes below.
Letterboxing ensures that all image data is displayed and its aspect ratio is maintained. See Letter Box Notes
below.
Define the anamorphic lens needed to stretch an image horizontally. Leave at "1" (default) if no anamorphic
lens is needed.
Select a screen file name from the drop-down list for which to modify settings or create a new screen file
with a different name.
Save current settings as a Screen file which can be accessed through the Channel: Page 1 menu.
Important! If you wish to save your settings to a new screen file, make sure to edit the screen file name
before you save. Otherwise, you will overwrite the settings of the loaded screen file. Restore will not cancel
a Save.
Cancel new (unsaved) screen settings and return to previously saved settings.
Save settings in a screen file.
Cancel unsaved screen set-
tings and display previous
saved settings.
Enable to display all incoming
data within the defined pre-
sentation area.
Define new display area
and/or cropping.
Define anamorphic lens
needed to stretch an
image horizontally.
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)