Christie CP2000-ZX User Manual page 154

Appendix A: Serial API
Output Reference Delay (TDT)
DESCRIPTION - Setup Output Reference Delay Time for 3D control. Controls how much delay between the input and output
reference timing.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select reference delay for the current channel
EXAMPLES:
(TDT+C101 1) Set Output Reference Delay Time to 1 on channel 101
(TDT+C101?) Get Output Reference Delay Time on channel 101
Input Frame Dominance (TFD)
DESCRIPTION - Setup Input Frame Dominance for 3D control. This selects which signal is considered first in the source sig-
nal, the left or the right.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select frame dominance for the current channel
EXAMPLES:
(TFD?L) List all entries on Input Frame Dominance control
(TFD+C101 1) Set Input Frame Dominance to 1 on channel 101
(TFD+C101?) Get Input Frame Dominance on channel 101
3D Frame Rate Multiple (TFR)
DESCRIPTION - Setup frame rate multiple for 3D control
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select 3D frame rate for the current channel.
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 1) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
Input Reference GPI (TGI)
DESCRIPTION - Setup Input Reference General Purpose Input for 3D control. Selects the signal to be used to synchronize the
video processing so the system knows which eye the images are targeted for.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select Input reference GPI for the current channel
EXAMPLES:
(TGI?L) List all entries on Input Reference GPI control
(TGI+C101 1) Set Input Reference GPI to 1 on channel 101
(TGI+C101?) Get Input Reference GPI on channel 101
A-26 CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)