Christie CP2000-ZX User Manual page 142

Appendix A: Serial API
Lamp Mode (LPM)
DESCRIPTION - Set lamp mode to constant power or LiteLOC™ for global and per channel. NOTE: This control depends on
the state of the Power Per Button (PPB) control. When PPB is on, the lamp hardware will be set according to the channel spe-
cific value of LPM. When PPB is off, the lamp hardware uses the global (GLOB) value for LPM.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
GLOB Set lamp mode for global. The value is used when PPB is 0
NONE Set lamp mode for the current channel.
EXAMPLES:
(LPM 1) Set Constant Power mode for current channel.
(LPM+C101 1) If channel 101 active, same as (LPM 1).
(LPM+C102 "Constant Power") If channel 102 INactive, set Constant Power mode for channel 102, regardless of PPB.
(LPM+GLOB 0) Set Lamp Intensity mode for global. All channels with PPB off will use this value. If current channel's PPB is
off, the lamp will adjust immediately.
(LPM+C108 ?) Get lamp mode for channel 108, regardless of PPB.
Lamp Power (LPP)
DESCRIPTION - Set lamp power to be used when in Constant Power Mode. NOTE: This control depends on the state of the
Power Per Button (PPB) control. When PPB is on, the lamp hardware will be set according to the channel specific value of LPP.
When PPB is off, the lamp hardware uses the global (GLOB) value for LPP.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
GLOB Set lamp power for all channels when PPB is off.
MINI Read-only value, get nominal minimum lamp power for the current lamp
NONE Set lamp power for the current channel.
EXAMPLES:
(LPP 2500) Set lamp power to 2500 for current channel
(LPP+C101 2500) If channel 101 active, same as (LPP 2500)
(LPP+C102 2500) If channel 102 INactive, set lamp power to 2500 for channel 102, regardless of PPB.
(LPP+GLOB 2500) Set lamp power to 2500 for global. All channels with PPB off will use this value. If current channel's PPB
is off, the lamp will adjust immediately.
(LPP+C108 ?) Get lamp power for channel 108, regardless of PPB
Lens Vertical Direction (LVD)
DESCRIPTION - Get/set the current vertical direction
SUBCODE DESCRIPTION OF USE
None (LVD {1 | -1})
EXAMPLES:
(LVD 1) set vertical direction to positive
(LVD?) return current vertical direction (1 or -1)
A-14 CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)