Christie CP2000-ZX User Manual page 140

Appendix A: Serial API
Local Settings (LOC)
DESCRIPTION - Set the localization options such as Language and display options for temperature units.
SUBCODE DESCRIPTION OF USE
LANG Set the primary language. 0 - English. (Choices are Deferred past V1.0)
TEMP Set the temperature units. 0 - Celsius. (Choices are Deferred past V1.0)
TIME Set Time format. 0 - 24 hour, 1 - 12 hour.
EXAMPLES:
(LOC+TIME 1) Set time zone to standard 12 hour
(LOC+TIME?1) Get list of formats
(LOC+TIME?)(LOC+TIME!001) Get time format
None
Lamp Changed (LPC)
DESCRIPTION - Record current lamp information into the lamp history, then start a new entry. Set lamp information of a new
lamp type ID, serial number, and pre-used hours.
SUBCODE DESCRIPTION OF USE
LPID Set lamp type ID for the new lamp
PREV Set lamp previous lamp hours for the new lamp
SERL Set lamp serial number for the new lamp
EXAMPLES:
(LPC+LPID "CDX-30") Set lamp type ID
(LPC+SERL "CDX30-001") Set lamp serial number
(LPC 1) Save information to lamp history
(LPC 1) Consecutive lamp changes requires 5 - 10 second time difference as writing to EEPROM is involved.
Lamp Hours (LPH)
DESCRIPTION - Read only control, get information on installed lamp.
SUBCODE DESCRIPTION OF USE
FLSK Return Total failed lamp strikes on the installed lamp
FRSK Return Total failed lamp restrikes on the installed lamp
LPOF Return Total lamp unexpected off times on the installed lamp
NONE Return Lamp usage for current lamp in hours.
TLSK Return Total lamp strikes on the installed lamp
EXAMPLES:
(LPH?) Get usage in hours
(LPH+FLSK?) Get lamp strikes
A-12 CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)