Christie CP2000-ZX User Manual page 135

Gamma Control (GAM)
DESCRIPTION - Gamma control, gamma file will be set when PCF in Use (PIU) i s off. This control describes the gamma
response curve for the source signal.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select gamma for the current channel.
EXAMPLES:
(GAM+C108 "gamma 2.6") Use file "gamma 2.6" on channel 108
(GAM+C108?) Get gamma file name on channel 108
(GAM?L) List all entries of gamma control
Lamp History (HIS)
DESCRIPTION - Retrieve the history of installed lamp entries, including the current lamp. There is an individual entry for
each lamp in the history. The format for each entry is: (HIS!AAA "BBBB/BB/B" "C" "D" EEE FFF GGG HHH III JJJ).
A = Lamp Number
B = Date Installed
C = Serial Number
D = Type
E = Strikes
F = Failed Strikes
G = Failed Restrikes
H = Unexpected Lamp Off
I = Pre-installed Hours
J = Lamp Hours
SUBCODE DESCRIPTION OF USE
NONE None
EXAMPLES:
(HIS?)
(HIS!000 "N/A" "N/A" "N/A" 000 000 000 000 000 000)
(HIS!001 "2007/05/21" "qa-1" "CDXL-30" 000 000 000 000 020 020)
(HIS!002 "2007/05/21" "qa-2" "Other-30" 000 000 000 000 015 015)
(HIS!003 "2007/05/21" "qa-3" "Other-20" 000 000 000 000 000 000)
Serial Help (HLP)
DESCRIPTION - Query a list of all available serial commands with brief descriptions and current enabled states.
SUBCODE DESCRIPTION OF USE
NONE Request entire command help listing or list for a single command
EXAMPLES:
(HLP?) Retrieve entire command help listing
(HLP? "BRT") Retrieve all subcodes/descriptions/enables for BRT control
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Appendix A: Serial API
A-7