Christie CP2000-ZX User Manual page 145

Projector Configuration File (PCF)
DESCRIPTION - Set Projector Configuration File (PCF) file for the specified channel. This file is used to configure many
aspects of the cinema electronics. It will only be used if PCF in use (PIU) control is set.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
None Select PCF file for the current channel
RFSH Set (1) to refresh files, 0 do nothing
EXAMPLES:
(PCF+C108 "SCOPE 2.39") Use PCF file "Scope 2.39" on channel 108. File used when PIU is on
(PCF?L) List all entries of PCF control
(PCF+RFSH 1) Refresh TI file list
Pull-down Offset (PDO)
DESCRIPTION - Set pull-down Offset.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select pull-down Offset for the current channel
EXAMPLES:
(PDO?L) List all entries on pull-down offset control
(PDO+C101 1) Set pull-down offset to 1 on channel 101
(PDO+C101?) Get pull-down offset on channel 101
Pull-down Resync (PDR)
DESCRIPTION - Set pull-down resync.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select pull-down resync for the current channel. 0 - enable, 1 - disable. The default value is 0 (enabled).
EXAMPLES:
(PDR+C101 1) Disable pull-down resync on channel 101
(PDR+C101 0) Enable pull-down resync on channel 101
(PDR+C101?) Get pull-down resync on channel 101
Pull-down Sequence (PDS)
DESCRIPTION - Set pull-down Sequence.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select pull-down Sequence for the current channel.
EXAMPLES:
(PDS?L) List all entries on pull-down sequence control
(PDS+C101 1) Set pull-down sequence on channel 101
(PDS+C101?) Get pull-down sequence on channel 101
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Appendix A: Serial API
A-17