Christie CP2000-ZX User Manual page 155

TI Certificate and Tracking Key (TIG)
DESCRIPTION - Gets the TI certificate and tracking key
EXAMPLES:
(TIG+CERT?) Gets the TI certificate
(TIG+TKEY?) Gets the TI tracking key
Input Reference (TIR)
DESCRIPTION - Setup Input timing Reference for 3D control
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
None Select input reference for the current channel
EXAMPLES:
(TIR?L) List all entries on Input Reference control
(TIR+C101 1) Set Input Reference to 1 on channel 101
(TIR+C101?) Get Input Reference on channel 101
Time/Date (TMD)
DESCRIPTION - Set the time zone
SUBCODE DESCRIPTION OF USE
DATE Set the date in the form yyyy/mm/dd
TIME Set the local time in the form hh:mm:ss. NOTE: Time must be set using 24 hr clock (regardless of
LOC+TIME setting)
ZONE Set the time zone
EXAMPLES:
(TMD+ZONE 20) Set time zone to EST
(TMD+TIME "17:50:45") Set new local time
(TMD+DATE "2007/02/30") Set the local date
(TMD+TIME?) Get local time (TMD+TIME! 17:50:45)
Output Reference GPO (TOO)
DESCRIPTION - Setup Display Reference GPO for 3D control. This signal selects the output signal that will be used as a ref-
erence to the gating technology so that the images can be targeted to the correct eyes.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid Range is 101 - 164.
NONE Select GPO for the current channel
EXAMPLES:
(TOO?L) List all entries on Output Reference GPO control
(TOO+C101 1) Set Output Reference GPO to 1 on channel 101
(TOO+C101?) Get Output Reference GPO on channel 101
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Appendix A: Serial API
A-27