Non-Cinema Dvi Inputs (For Alternate Content); Control Ports; Control Display Panel (Cdp) - Christie CP2000-ZX User Manual

6.2.2 Non-Cinema DVI Inputs (for Alternate Content)

• Number of inputs
• Standard supported
• Connector type

6.2.3 Control Ports

Ethernet connector (2): RJ-45 female
RS232 A Port:
RS232 B Port:
GPIO (1): 37-pin D female
USB (1): USB device standard size
Ballast Control Port (1): Not a user port
Ballast Interlock Port (1): Not a user port
SCCI:
MALM:
6.3

Control Display Panel (CDP)

Type
Display Size
Display Resolution (H x V pixels)
Integrated Operating System
Dimensions (W x H x D)
Communication interface with projector
Power Requirement:
LCD display with status light
Keypad Backlight
Interface Connector
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
2
VESA Digital Visual Interface (DVI-D)
24-pin female DVI-D
100 Base-TX, 100 Mbps max.
PC communication (non-serial API) for direct DLP
communication
9-pin D female
38,400 bps (default)
Christie proprietary protocol intended for Christie
accessories or automation controllers
9-pin D female
9600 bps (default)
16-8 inputs, 8 outputs, opto-isolated connection
38.4 kbps
9-pin D male, RS-232 with proprietary communication
protocol
9-pin D female, +5V TTL-compatible, opto-isolated at
ballast end
9-pin D female, Contact closure pairs +5VDC and Opto LED
9-pin D male, control signals opto-coupled
4 lines x 20 character LCD backlit
2 inch diagonal
122 x 32 pixels
LCDPROC
10.6 cm x 15.7 cm x 3.1 cm
RS232
0.25 A max. at 5VDC +/- 10%
0.060 A max. at 5VDC +/- 10%
9-pin DB9
Section 6: Specifications
6-3