Christie CP2000-ZX User Manual page 131

Backup (BAK)
DESCRIPTION - This control backs up various parts of the system. Files are zipped, date/time stamped and placed in the /var/
www/backup directory.
SUBCODE DESCRIPTION OF USE
CFIL Retrieve the name of the last sucessful configuration backup. Read only sub code.
CHAN Meaningless value. Simply used to trigger. Use 1.
CONF Meaningless value. Simply used to trigger. Use 1.
HFIL Retrieve the name of the last sucessful channel file
IFIL Retrieve the name of the last sucessful interrogator file
INTR A value of 0 will launch the interrogator in normal mode. This collects the common logs in the system. A
value of 1 will launch the interrogator in enhanced mode. Enhanced mode offers additional debug info as
well as provides the normal info.
ISTA Retrieve the current state of the interrogator. 0 means not running.
PFIL Retrieve the name of the last sucessful preference backup. Read only sub code.
PREF Meaningless value. Simply used to trigger. Use 1.
UFIL Retrieve the name of the last sucessful user backup. Read only sub code.
USER Meaningless value. Simply used to trigger. Use 1.
EXAMPLES:
(BAK+CONF 1) Backup all configuration controls
(BAK+USER 1) Backup all users
(BAK+INTR 1) Run interrogator enhanced
(BAK+INTR 0) Run interrogator normal
(BAK+CFIL?)(BAK+CFIL!"http:192.168.0.0/backup/config_model_sub_serial_date_time.tar")
(BAK+CHAN 1) - Backup all channel controls
Baud Rate (BDR)
DESCRIPTION - Set the baud rate for a serial communications port.
SUBCODE DESCRIPTION OF USE
PRTA Set the baud rate on port A. Rates can be 1200, 2400,9600.19200,38400,57600 or 115200
EXAMPLES:
(BDR+PRTA "115200") Set baud rate on port A to 115200 bits per second
(BDR+PRTA?) Get baud rate (BRD+PRTA! "115200")
Emergency Stop (BGT)
DESCRIPTION - Emergency Stop for commands that are running in a separate thread.
SUBCODE DESCRIPTION OF USE
STOP Action command (no argument required)
EXAMPLES:
(BGT+STOP) Stop any currently running control threads
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
Appendix A: Serial API
A-3