Operation - Christie CP2000-ZX User Manual

3
This section describes how to use controls and switches for basic operation of the projector once it
is properly installed, aligned and configured by a qualified service technician. NOTE: These
illustrations provided are to enhance the understanding of the written material and may not
represent your exact projector model.
• 3.1 About Projector Components
• 3.2 Powering Up/Powering Down the Projector
• 3.3 Using the Control Display Panel (CDP)
• 3.4 Using the Web User Interface
• 3.5 Upgrading and Downgrading Software
• 3.6 Working with the Lamp
• 3.7 Working with the Lenses
• 3.8 Working with 3D
• 3.9 Cinema Operation
• 3.10 Non-Cinema Operation
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)

Operation

3-1