Christie CP2000-ZX User Manual page 134

Appendix A: Serial API
Enable Error Messages (EME)
DESCRIPTION - Enable error messages.
SUBCODE DESCRIPTION OF USE
FANF 0 - No Fan Fail warning will be generated; 1 - Fan Fail warning will be generated.
NONE 0 - disable broadcast; 1 - enable broadcast of error messages to all connected serial ports and telnet ses-
sions.
TEMP 0 - No Over Temperature warning will be generated; 1 - Over Temperature will be generated.
EXAMPLES:
(EME 1) enable broadcasting error messages
(EME+FANF 0) disable fan fail alarm warnings
(EME?) requests current state of broadcast. Example response is (EME!001)
Lens Focus Direction (FCD)
DESCRIPTION - Get/set the current focus direction.
SUBCODE DESCRIPTION OF USE
None (FCD {1 | -1})
EXAMPLES:
(FCD 1) set focus direction to positive
(FCD?) return current focus direction (1 or -1)
Focus Lens Position Adjustment (FCS)
DESCRIPTION - Adjust lens to specific focus position.
Use command without subcode:
If ILS is on, motor will move to specified steps and save data to the active channel.
If ILS is off, motor will move to specified steps, do not save data to the active channel
Use FCS with Subcode CXXX (active channel):
If ILS is on, motor will move to specified steps and save data to the active channel.
If ILS is off, motor will not move, save data to the active channel.
Use FCS with Subcode CXXX (inactive channel):
Just save data to specified channel, no hardware movement.
SUBCODE DESCRIPTION OF USE
CXXX Lens to specific focus position on channel CXXX.
BACP Motor backlash in positive direction, read-only for ILS.
BACN Motor backlash in negative direction, read-only for ILS.
RNGP Motor moving range in positive direction, read-only for ILS
RNGN Motor moving range in negative direction, read-only for ILS
EXAMPLES:
(FCD -1) Set negative direction
(FCS 500) Move lens to position 500 at focus motor
(FCS+CXXX -500) Set lens to position of channel XXX to -500 at focus motor
(FCS ?) Return current motor position
A-6 CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)