Using Slide Bar Controls; Editing Text Or Numerical Values; Channel Menu - Christie CP2000-ZX User Manual

Section 3: Operation

Using Slide Bar Controls

In some cases, the current value of a given parameter can be adjusted. Depending on the parameter, the number
displayed may have units associated with it or may be expressed as a percentage. Press the
keys on the CDP to adjust the setting up or down. Alternatively, press
can alter a value using the

Editing Text or Numerical Values

Some options allow editing of text or numerical values. When you enter one of these editing windows, the first
character will begin flashing, indicating the option for editing. Use the
the list of alphanumeric characters. The longer you keep the arrow key depressed the faster scrolling occurs.
Use the /
LEFT RIGHT
Incorrect characters cannot be deleted, you must type a new character over it.

Channel Menu

Use the /
UP DOWN
. To further edit a channel, select Edit Channel. This activates another menu of options to tailor the
ENTER
projector processing for any type of incoming source, including 3D material, and collect these settings into a
unique channel that any user can select using the CDP or through the web user interface Main menu. A
maximum of 64 channels can be defined.
NOTE: Only selected "active" channels can be edited though the CDP.
Refer to Section 3.4 Using the Web User Interface
the web user interface.
3-8
/ arrow keys. After altering a value, press
UP DOWN
arrow keys to move along the text line. Spaces are included in the character selection.
arrow keys to scroll through a list of available channels. To select a desired channel, press
Channel
====== =============
Channel
1998 x 1080 Flat XYZ
Edit Channel
Figure 3-3 CDP Channel Menu Options
ENTER
/
UP DOWN
for a general description of the same controls accessible via
Channel Name
Input
Data Format
Cinema Path
Screen Format
Color Space
Gamma
Lut-Clut
Measured Color
Source Format
Target Color
PCF File
Use PCF
3D Control
Channel Icon
Lamp Per Channel
Lamp Mode
Lamp Power
Intensity
Aux Lens In
/
LEFT RIGHT
to switch to edit mode, where you
again to accept.
ENTER
arrow keys to scroll through
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)
arrow